帶錫膏測厚功能的自動加錫裝置，系深圳市三捷機械設備有限公司自主研發，具備自主知識產權的一種新型自動化設備。該裝置繼承了三捷機械自動加錫各項優點，如：兼容各類主流廠商的瓶裝錫膏，無需客戶更改特殊包裝；采用倒立式出錫，無需在錫膏瓶的底部鉆孔；程序控制移動式加錫等。在此基礎上，新增了錫膏高度實時偵測功能。該功能有如下突出的特點：

• 激光測厚。該裝置采用激光反射傳感器，實施監測鋼網上焊錫膏的滾動直徑（圖1所示），當所測的錫膏高度低于設定值時，即觸發加錫。相比于傳統的按照PCB板計數的功能，該功能對自動加錫裝置作閉環控制，實時監測鋼網上的錫膏厚度，測量精度可達1mm, 避免用計數方式設定加錫頻率而帶來的錫膏添加量不足的問題。

圖1. 激光反射傳感器實施監測鋼網上焊錫膏的滾動直徑

• 通過實時監測焊錫膏的滾柱高度，對鋼網上的錫膏實現了閉環控制（圖2）。可以始終保持鋼網上有定量的錫膏，最大程度上提升了保證品質。

   

  圖2. 實時監測焊錫膏的滾柱高度，對鋼網上的錫膏實現了閉環控制

• 節省焊錫膏。擠壓倒立式出錫，可使空瓶的錫膏殘留量少于6克(圖3)。減少浪費。

   

  圖3. 空瓶的錫膏殘留量少于6克

• 提高印刷效率。系統通過傳感器感知刮刀的上下運動，硬件和軟件均獨立加裝于印刷機之外。加錫時序位于2次PCB板進板中間的間隔，或者印刷機擦拭鋼網的時間片刻，無需額外占用印刷機的生產時間，從而提升效率。

• 安全環保。自動加錫可以有效避免操作員工同錫膏直接接觸，最大程度上降低了焊錫膏里揮發性溶劑和重金屬物質對人體的傷害，保證人員健康。

通過加裝三捷機械的自動加錫系統，可以使客戶的錫膏添加不再依賴于人工，另外，對于錫膏品種如錫膏種類、成分特性、有效期等，以及加錫過程參數如鋼網上的實時錫膏量、加錫頻率、每次的添加量等指標都可以做有效管控。在可預見的將來，三捷機械的自動加錫系統會被推廣并廣泛應用于我國的SMT各行各業，從而為我國的工業制造盡一份綿薄之力。

Dispensing Unit with Paste Roll Height Monitor

Abstract: By installing auto paste dispenser with Paste Roll Height (PRH) monitor, the solder paste dispensing can be controlled as a close-loop system. Once the paste roll height is below the setting value, it will trigger automatic dispense.

Author: ShenZhen Synergies Machinery Co., Ltd

Date: Mar-22-2018

The solder paste dispenser with Paste Roll Height (PRH) monitor is a close-loop dispensing system developed by Shen Zhen Synergies Machinery. Compared to conventional units, the system is highlighted by the following strengths:

1. Compatible with different kinds of solder paste jars. The solder paste is squeezed by a special designed piston and there’s no need to drill holes underneath of the jar.

2. Dispensing on the fly. The solder paste dispensing trajectory can be programmed so that the solder paste can be evenly dispensed onto the stencil, the paste rolls are fully mixed and thus ensures best printing quality.

3. Real-time paste roll monitor. By mounting one or several laser-beam sensors around the paste roll, the system can inspect the real-time paste roll height. Once the paste roll height is below the setting value, it will trigger automatic dispense. Manufacturing defects caused by insufficient solder paste which is mostly caused by incorrect dispensing frequency can be eliminated by this close-loop system.

By installing auto paste dispenser with PRH monitor, the SMT printing progress can be greatly improved by:

1. The printing quality will be improved as the solder paste on the stencil can be maintained by a certain amount through the PRH monitoring.

2. Less residue on the empty jar, less waste. The residue solder paste on the jar can be squeezed as less as 6g, which reduces possible waste effectively.

    

3. More ergonomic and environmental. Operator no longer needs to touch the solder paste as it is enclosed by a chamber. This eliminates the risk of exposing the volatile solvent as well as the toxic metallic substances inside of the solder paste to the operators’ skin or eye.